ABS Plastic 600 ML Wall Mounted Hand Sanitizer Dispenser

Product Name:600ML Automatic Soap Dispenser Infrared Sensor Wall Mounted Shower Hand Gel Liquid Pump Dispenser

Product parameter

• Automatic Hand Sanitizer Dispenser Wall Mounted: Automatic Hand Sanitizer Dispenser Wall Mounted with Sensor, Put your hand under the sensor 8-12cm, and let the dispenser to start working for continuously until liquid soap come out from nozzle, Fast hand disinfection and prevent cross infection(NOTE: When you use dispenser at first time, there was some air in the pump, you need work dispenser several times until liquid soap or foam drop down)

• White Automatic Soap Dispenser with Transparent Water Tank Design: 600ml capacity container-practical transparent Design, Open Soap Dispenser cover and refilling soap or foam to the container, You can see the remaining volume in real time. which is powered by 4 AA batteries, sanitizer dispenser have low voltage indicator, when you find LED light twinkle continually while dispenser on standby mode, battery replace is necessary. (NOTE: this product does’t contain batteries and disinfectan)

• Safe&Environment Simple Human Touchless Foam Soap Dispenser: Simple Human Soap Dispenser Automatic Using High-Performance Motor and Infra Red Detection, Durable ABS+PC Material, with good impact resistance and corrosion resistance, Suitable for Hospital, Kitchen, Bathroom, Barber Shop, and Toilet of Restaurant, Hotel, Office, Public Area, etc.

• Leak-Proof Design of Refillable Sensor Pump Hand gel Dispensador: Hand gel Pump Dispensador with Spray Head Using Leak-Proof Design, Prevent liquid dripping and maintain hygiene, Low consumption, safety, convenience, Cleanness. Soap dispenser is suitable for soap liquid, Foam dispenser is suitable for foam liquid, It can't be mixed, Can Meet The Needs of Kids/Adult and Any Other Family Members

• Ergonomic design & Perfect Service: Split and combined design, easy to install and disassemble, Use the mounting plate or Sticker as a template to mark the position, Slide the dispenser in the mounting plate, Do not install the dispenser with less than 2 inch height beneath the table.If you have any questions during use, please contact us in good time. We offer reliable customer service.(NOTE: Do not install the dispenser above the mirror surface or above flowing water)

Installation

Choose a suitable place to install this dispenser,do not install it on the mirror surface and keep 40cm free from sensor

1. Pull mounting plate down out of the back.

2. Mark three holes,then drill three.

3. Fix the mounting plate firmly on the wall.

4. Open the battery compartment,and put four AA alkaline batteries into the battery compartment to ensure the battery direction is correct.

5. Installing the backplane on the back.

6. Open the top cover and fill in the hand sanitizer.

7. Turn on the power switch.

8. Put your hand on the sensor area at the bottom to work.The first time you use the dispenser,you need to operate it several times to remove the air inside.

9. When the battery power is low,the red LED will flash quickly,indicating that you need to replace the battery